Vanguard EZCT-2000 User Manual
Page 35
REV 3 EZCT-2000 USER’S MANUAL
31
NOTES
• You can press the
[STOP]
key to cancel the process.
• If you do not know the record number, you can first print a test
record directory using the instructions in section 3.4.3.
The following screen will be displayed momentarily:
Then the following confirmation screen will be displayed:
Press any key to return to the “START-UP” menu.
2. ERASE ALL RECORDS
Press the
[2]
key if you would like to erase all of the test records stored in the
EZCT-2000’s flash EEPROM. The following confirmation screen will be displayed:
If you would like to cancel the erasure process, press the
[STOP]
key. No
records will be erased and you will be returned to the “START-UP” menu.
Press the
[ENTER]
key to continue with the erasure process. The following
screen will be displayed while the records are being erased:
The following screen will be displayed after all of the test records have been
erased:
Press any key to return to the “START-UP” menu.
RECORDS ERASED
ERASING RECORDS
PLEASE WAIT...
ERASE ALL RECORDS!
ARE YOU SURE?
“ENTER” TO CONTINUE
RECORD NUMBER 1
ERASED!
ERASING RECORD
NUMBER: 01
PLEASE WAIT...