Vanguard EZCT-10 - Manual (Page 14)

EZCT VERSION 5.x SOFTWARE MANUAL REV 1
12
3.4 Printer Setup
To setup the printer:
1. Click on the File menu and select Print Setup… The following window will be displayed:
2. Select the printer you would like to use from the “Name” drop-down list.
3. Select the appropriate options for the printer.
NOTE
“Landscape” should be selected for the “Orientation” to make sure that the
data table is not cut off on the printout. Also, please be sure to select
“Landscape” as the default print orientation under Application Setup (See
section 3.3)
4. Click on the “OK” button.