Vanguard CVT-765 - Manual (Page 28)

CVT-765 USER’S MANUAL REV 1
25
d. The following screen will be displayed:
NOTE
If you have a USB Flash drive inserted in the CVT-765’s “USB MEM” port, the
following screen will be displayed instead of the above screen:
Press the [1] key (INTERNAL STORAGE).
The following screen will be displayed:
Continue with the steps below.
1. ENTER RECORD NUMBER
Press the [1] key (ENTER RECORD NUMBER) if you know the record number that
you would like to restore.
1.1. The following screen will be displayed:
Type the record number using the alpha-numeric keypad and then press
the
[ENTER]
key.
RESTORE RECORD
NUMBER:
RESTORE RECORD
1.ENTER RECORD NUMBER
2.SCROLL TO SELECT
1.INTERNAL STORAGE
2.THUMB DRIVE
RESTORE RECORD
1.ENTER RECORD NUMBER
2.SCROLL TO SELECT