Vanguard CVT-765 - Manual (Page 2)

CVT-765 USER’S MANUAL REV 1
i
SAFETY SUMMARY
FOLLOW EXACT OPERATING PROCEDURES
Any deviation from procedures described in this User’s Manual may create one or more safety
hazards, damage the CVT-765, damage the test transformer, or cause errors in the test results.
Vanguard Instruments Company, Inc. assumes no liability for unsafe or improper use of the
CVT-765.
SAFETY WARNINGS AND CAUTIONS
The CVT-765 shall be used only by trained operators. All transformers under test shall be off-
line and fully isolated. Always ground the CVT-765 to a substation ground before connecting
the test cables to a transformer. Do not perform test procedures or service unless another
person is also present who is capable of rendering aid and resuscitation.
DO NOT MODIFY TEST EQUIPMENT
To avoid the risk of introducing additional or unknown hazards, do not install substitute parts or
perform any unauthorized modification to any CVT-765 test unit. To ensure that all designed
safety features are maintained, it is highly recommended that repairs be performed only by
Vanguard Instruments Company factory personnel or by an authorized repair service provider.
Unauthorized modifications can cause safety hazards and will void the manufacturer’s
warranty.
WARNING
Do not remove test leads during a test. Failure to heed this warning can result in electrical
shock to personnel and damage to the equipment.