Teledyne LeCroy WaveStation 3000 Getting Started Guide - Manual (Page 9)

7
WaveStation 3000 Getting Started Guide
Warranty
NOTE: THE WARRANTY BELOW REPLACES ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OF MERCHANTABILITY, FITNESS, OR ADEQUACY FOR ANY
PARTICULAR PURPOSE OR USE. TELEDYNE LECROY SHALL NOT BE LIABLE
FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER
IN CONTRACT OR OTHERWISE. THE CUSTOMER IS RESPONSIBLE FOR
THE TRANSPORTATION AND INSURANCE CHARGES FOR THE RETURN OF
PRODUCTS TO THE SERVICE FACILITY. TELEDYNE LECROY WILL RETURN ALL
PRODUCTS UNDER WARRANTY WITH TRANSPORT PREPAID.
The WaveStation is warranted for normal use and operation, within specifications,
for a period of three years from shipment. Teledyne LeCroy will either repair or, at
our option, replace any product returned to one of our authorized service centers
within this period. However, in order to do this we must first examine the product
and find that it is defective due to workmanship or materials and not due to
misuse, neglect, accident, or abnormal conditions or operation.
Teledyne LeCroy shall not be responsible for any defect, damage, or failure caused
by any of the following: a) attempted repairs or installations by personnel other
than Teledyne LeCroy representatives or b) improper connection to incompatible
equipment, or c) for any damage or malfunction caused by the use of non-Teledyne
LeCroy supplies. Furthermore, Teledyne LeCroy shall not be obligated to service a
product that has been modified or integrated where the modification or integration
increases the task duration or difficulty of servicing the instrument. Spare and
replacement parts, and repairs, all have a 90-day warranty.
The instrument's firmware has been thoroughly tested and is presumed to be
functional. Nevertheless, it is supplied without warranty of any kind covering
detailed performance. Products not made by Teledyne LeCroy are covered solely by
the warranty of the original equipment manufacturer.
MaiNteNaNce aND warraNty
Maintenance
• Clean the outside of the WaveStation using a soft cloth moistened
with water or isopropyl alcohol solution. Dry thoroughly. Do not use
harsh or abrasive cleansers. Do not submerge instrument or allow
moisture to penetrate.
• Perform SelfCal and SelfTest(s) as needed. See the
WaveStation 3000 Operator’s Manual for instructions.
• Schedule Factory calibration once per year. Contact your local
Teledyne LeCroy office for service.