Teledyne LeCroy WaveStation 3000 Getting Started Guide - Manual (Page 6)

4 922868-00 Rev A
C
Basics
Generate a Basic Waveform
1. Press CH1/CH2 button
A
to select channel.
2. Press Waveform button
B
, then press softkey button
C
to choose waveform type from option menu.
3. Press Parameter button
D
.
4. Adjust waveform parameters:
- Press softkey button
C
to select parameter.
- Press Left/Right button E to select digit.
- Turn knob
F
to change value.
5. Press CH1 or CH2 Output button
G
to output the waveform.
Generate a Modulated Waveform
Complete the steps to generate a basic waveform, then:
1. Press Mod(ulate) button
H
.
2. Press softkey button C to select modulation type -
AM, FM, PM, FSK and others.
3. Press softkey button
C
to select shape of the
modulating waveform.
4. Adjust other modulation parameters.
5. Press CH1 or CH2 Output button
G
to output the waveform.