Teledyne LeCroy SAS Sample Test Suite - Manual (Page 44)

SAS Sample Test Suite
Error Conditions – Frames Received from Initiator (Test Group C) 44
4. Allow the DUT to open an SSP connection and transmit a SCSI response frame to
the received command and data.
Observable Results: Verify if the DUT sets the DATAPRES field to RESPONSE_DATA and the
RESPONSE CODE field to INVALD FRAME.
SSP_FRAMES – Variable Length Command missing additional Data (TestC.9.5)
SAS2r14b, 9.2.5.3
Test Update
Test 9.1.17x
Test Procedure:
1. The Testing Station is instructed to start and complete a phy Reset sequence
followed by an Identify sequence with the DUT. Since the DUT is a target, the
Testing Station is instructed to transmit an Identify Address frame indicating that it
is a SAS Initiator.
2. The Testing Station is instructed to open an SSP connection to the DUT and transmit
a normal SCSI INQUIRY command. And wait for DUT to respond with good status.
3. The Testing Station is instructed to open an SSP connection to the DUT and transmit
a SCSI command with a variable format CDB and the additional data portion of the
frame missing. Close the connection
4. Allow the DUT to open an SSP connection and transmit a SCSI response frame to
the received command and data.
Observable Results: Verify if the DUT sets the DATAPRES field to RESPONSE_DATA and the
RESPONSE CODE field to INVALD FRAME.