Teledyne LeCroy SAS Sample Test Suite User Manual
Sas sample test suite
Table of contents
Document Outline
- Introduction
- Scope of document
- Installation, Configuration and Operation
- SAS Test Description
- Normal Recovery (Test Group A)
- Error Conditions – Frames Sent to Initiator (Test Group B)
- Error Conditions – Frames Received from Initiator (Test Group C)
- CRC or other error resulting in NAK to Initiator (TestC.1)
- WRITE Command Receive DONE(ACK/NAK TIMEOUT) after sending ACK to Initiator (TestC.2)
- New Test for lost DUT ACK for a Read Command (TestC.3.1) (Previously known as TestC.3)
- New Test for lost DUT ACK for a SCSI INQUIRY Command (TestC.4.2)
- CRC or other error resulting in NAK to Initiator (TestC.5.1)
- CRC on data resulting in NAK and abort Response to Initiator (TestC.5.2)
- Receive DONE(ACK/NAK TIMEOUT) after sending ACK to the Initiator (TestC.6)
- CRC or other error resulting in NAK to Initiator (TestC.7)
- Receive DONE(ACK/NAK TIMEOUT) after sending ACK to Initiator (TestC.8)
- Invalid frames for SSP_FRAMES (TestC.9.1 – TestC.9.8)
- SSP_FRAMES – Variable Length Command missing additional Data (TestC.9.5)
- SSP_FRAMES – Data Offset Sequence error Duplicate frame (TestC.17)
- Connection Errors (Test Group D)
- Test Update
- SSP ERROR HANDLING – Disabled BREAK_REPLY and Receive BREAK redundant primitive (TestD.7.1)
- SSP ERROR HANDLING – Enable and verify BREAK_REPY and Receive BREAK redundant primitive (TestD.7.2)
- BREAK TIMEOUT after sending BREAK redundant primitive (TestD.8)
- Receive BROADCAST(CHANGE) redundant primitive (TestD.9)
- SSP ERROR HANDLING – Break on Read Data frame sequence (TestD.10.2)
- SSP ERROR HANDLING – Break on Write Data frame sequence (TestD.10.3)
- Error Conditions – Connection not Established (Test Group E)
- Behavior After Receiving a Task Management Request (Test Group F)
- SCSI CDB – Undefined Task Management Function (TestF.10)
- SCSI CDB – Reserved Task Management Function (TestF.11)
- SCSI CDB – Identical Write command sequence with TAG Conflict (no retran bit) (TestF.15.2)
- SCSI CDB – Identical Read command sequence with TAG Conflict (no retran bit)(TestF.15.3)
- SCSI CDB – Read and ABORT TASK command sequence with TAG Conflict (TestF.15.4)
- SCSI CDB – Write and Query TASK command sequence with same TAG Conflict (TestF.15.5)