Teledyne LeCroy Verification Script Engine for Teledyne LeCroy PETracer Reference Manual - Manual (Page 39)

Teledyne LeCroy Verification Script Engine Reference Manual Version 6.6x
34
8.12 SendDllpType()
This function specifies more precise tuning (filtering in) for sending DLLP packets to the script.
Format:
SendDllpType( dllp_type )
Parameters:
dllp_type Encoding of the DLLP type. This parameter may be one of the following values:
DLLP type values:
Constant DLLP type
_DLLP_TYPE_ACK Ack
_DLLP_TYPE_NAK Nak
_DLLP_TYPE_INIT_FC1_P InitFC1-P
_DLLP_TYPE_INIT_FC1_NP InitFC1-NP
_DLLP_TYPE_INIT_FC1_CPL InitFC1-Cpl
_DLLP_TYPE_INIT_FC2_P InitFC2-P
_DLLP_TYPE_INIT_FC2_NP InitFC2-NP
_DLLP_TYPE_INIT_FC2_CPL InitFC2-Cpl
_DLLP_TYPE_UPDATE_FC_P UpdateFC-P
_DLLP_TYPE_UPDATE_FC_NP UpdateFC-NP
_DLLP_TYPE_UPDATE_FC_CPL UpdateFC-Cpl
_DLLP_TYPE_PM All Power Management DLLP types
_DLLP_TYPE_INVALID Invalid DLLP types
_DLLP_TYPE_INIT_FC All InitFC DLLP types
_DLLP_TYPE_UPDATE_FC All UpdateFC DLLP types
_ANY_TYPE All possible DLLP types
Example:
SendDllpType(_DLLP_TYPE_ACK ); # Send Ack DLLPs to the script
…
SendDllpType(_DLLP_TYPE_UPDATE_FC); # Send all UpdateFC DLLPs