Teledyne LeCroy IBTracer 4X - IBTracer Verification Script Engine Users Manual - Manual (Page 16)

Computer Access Technology Corporation IBTracer Verification Script Engine Manual, version 1.0
Page 16 of 35
8.2
SendEvent ()
This function specifies what kind of events should be sent to script.
Format :
SendEvent( event )
Parameters: event – This parameter can be combination of the following values:
event
value Description
_PKT_TS1 TS1
_PKT_TS2 TS2
_PKT_LINK Link Packet
_PKT_MAD MAD packets
_PKT_RC Reliable Connection packets
_PKT_RD Reliable Datagram packets
_PKT_UC Unreliable Connection packets
_PKT_UD Unreliable Datagram packets
_PKT_SKIPS Skips
_EVNT_CONNECT
Physical link woke up from silence
_EVNT_DISCONNECT Physical link came to silence (no physical signal)
_EVNT_LINKSTATE_CHANGE Changing of Opcode in series of link packets
Some special values can be used covering large groups of events:
_ALL_PACKETS All possible packets
_ALL_EVENTS All possible notification events
_ALL All possible packets and notification events
Example:
SendEvent( _PKT_LINK ); # - send link packets
SendEvent( _PKT_LINK | _PKT_MAD ); # - send link packets and MADs
SendEvent(_ALL_PACKETS | _EVNT_DISCONNECT );
# - send all possible packets and Disconnect notification