Teledyne LeCroy SierraFC Verification Script Engine Reference Manual - Manual (Page 24)

Verification Script Engine Reference Manual
19
10.5 SendChannelOnly()
This function specifies that ONLY events occurred on specified channel should be sent to the
script.
Format :
SendChannelOnly( channel )
Parameters: channel – This parameter can be one of following values:
_CHANNEL_1 ( = 1 ) – send ONLY events from channel 1
_CHANNEL_2 ( = 2 ) – send ONLY events from channel 2
_CHANNEL_3 ( = 3 ) – send ONLY events from channel 3
_CHANNEL_4 ( = 4) – send ONLY events from channel 4
_CHANNEL_5 ( = 5 ) – send ONLY events from channel 5
_CHANNEL_6 ( = 6 ) – send ONLY events from channel 6
_CHANNEL_7 ( = 7 ) – send ONLY events from channel 7
_CHANNEL_8 ( = 8 ) – send ONLY events from channel 8
Example:
…
SendChannelOnly( _CHANNEL_1 ); # - send ONLY events from channel 1
SendChannelOnly( _CHANNEL_5 ); # - send ONLY events from channel 5
…
SendChannelOnly( 6 ); # - send ONLY events from channel 6
SendChannelOnly( 8 ); # - send ONLY events from channel 8
…
10.6 DontSendChannel ()
This function specifies that events occurred on specified channel should NOT be sent to the
script.
Format :
DontSendChannel ( channel )
Parameters: channel – This parameter can be one of following values:
_CHANNEL_1 ( = 1 ) – DO NOT send events from channel 1
_CHANNEL_2 ( = 2 ) – DO NOT send events from channel 2
_CHANNEL_3 ( = 3 ) – DO NOT send events from channel 3
_CHANNEL_4 ( = 4) – DO NOT send events from channel 4
_CHANNEL_5 ( = 5 ) – DO NOT send events from channel 5
_CHANNEL_6 ( = 6 ) – DO NOT send events from channel 6
_CHANNEL_7 ( = 7 ) – DO NOT send events from channel 7
_CHANNEL_8 ( = 8 ) – DO NOT send events from channel 8
Example:
…
DontSendChannel ( _CHANNEL_1 ); # - DO NOT send events from channel 1
DontSendChannel ( _CHANNEL_5 ); # - DO NOT send events from channel 5
…
DontSendChannel ( 6 ); # - DO NOT send events from channel 6
DontSendChannel ( 8 ); # - DO NOT send events from channel 8
…