Asus P4V533-MX - Manual (Page 20)

1-10 Chapter 1: Product introduction
1.8 Central Processing Unit (CPU)
1.8.1 Overview
The motherboard comes with a surface mount 478-pin Zero Insertion Force (ZIF)
socket. The socket is designed for the Intel
® Pentium ® 4 Processor in the 478-pin
package with 512KB L2 cache. This processor supports 533/400MHz front side
bus (FSB), and allows data transfer rates of up to 4.3GB/s.
Note in the illustration that the CPU has a
gold triangular mark on one corner. This
mark indicates the processor Pin 1 that
should match a specific corner of the
CPU socket.
Incorrect installation of the CPU into the socket may bend the pins and
severely damage the CPU!
Gold Mark
Notes on Intel ® Hyper-Threading Technology
To use the Hyper-Threading Technology on this motherboard:
1. Buy an Intel Pentium 4 CPU that supports Hyper-Threading Technology. Install
the CPU. The board will auto-detect the installed CPU with Hyper-Threading
support.
2. Boot the computer.
1. This motherboard supports Intel Pentium 4 CPUs with Hyper-Threading
Technology.
2. It is recommended that you install WinXP Service Pack 1.
3. For more information on Hyper-Threading Technology, visit www.intel.com/
info/hyperthreading.