Mounting your winch – Superwinch Tiger Shark 9500- 4309 kgs/12V Installation User Manual

Page 3

MOUNTING YOUR WINCH

SUPERWINCH RECOMMENDS THE USE OF A MOUNT KIT FOR SECURE MOUNTING TO

YOUR VEHICLE. For information on available kits, contact your Superwinch product

dealer or go to www.superwinch.com for the most current list of kits.

If you choose not to purchase a mounting kit, your Superwinch needs to be attached

to a secure and flat mounting location. Note that your winch may not be able to be

operated safely without some equipment included in the kit. If you choose not to

purchase a mounting kit, contact Superwinch for recommended accessories and the

name of a dealer near you.

This winch must be mounted with the rope in the under wound

direction ( Fig. 1 ) Improper mounting could damage your winch

For winch capacities, a complete parts list, and an exploded diagram of your specific

Superwinch, refer to the Technical Data Sheet included in this package.

For instructions on safe winch operation and tips for prolonging the life of your winch,

refer to the User’s Guide included in this package.

MOUNTING KITS

Detailed mounting instructions for your specific vehicle are provided with each mount-

ing kit. Read and follow directions carefully.

CAUTION

and void your warranty.

Fig. 1

Note: Your winch is designed to ROPE IN and ROPE OUT in one direction. Do not at-

tempt to reverse the operation of your winch.

Overwind

Underwind

Do not mount winch inverted (base upward) or put the

winch mounting hardware in direct tension condition. In all

installations, the unit must be mounted so the rope feeds through the hawse or

roller fairlead on the front of the winch and does not rub across housings.

CAUTION

(NOTES,

NOTAS)

This manual is related to the following products: