Staub Electronics EP-400-NMC EPISODE - RACK MOUNT UPS NETWORK MANAGMENT CARD - Manual (Page 7)

Remote Management System
7
Figure 1. The main window of the “ Power Device Network Utility ” program.
4. Select the Remote Management Card you are setting up. Click on the Tools menu and select
“Device Setup,” or double-click the Remote Management Card you want to configure.
5. You can modify the IP Address, Subnet Mask, and Gateway address for the Device MAC
Address listed in the Device Network Settings window, as shown in Figure 2.
Figure 2. The network card setting window.
6. To modify the IP Address, Subnet Mask or Gateway address, enter the new addresses into the
corresponding fields.
7. You will need to enter a User Name and Password for the Remote Management Card in the
authentication window, as shown in Figure 3.
Default user name: admin
Default password: admin