SP / Silicon Power Sky Share S10 - Manual (Page 29)

29
12. Firmware Update
The latest firmware will be available on our website.
http://www.silicon-power.com/support/su_dlc.php
Once you download the firmware system files, please store them in the root
directory of Sky Share S10. The firmware may crash if the power is suddenly off
during the firmware update process. In order to secure the power supply, we
recommend you to update the firmware by our Silicon Power card reader.
Step 1: Please insert Wi-Fi SD into the card reader and make sure the card reader has
been connected with the computer.
Step 2: Copy the following system files to the root directory of Sky Share S10.
image3, initramfs3.gz, mtd_jffs2.bin, program.bin
(Referring to the figure 24)
Fig. 24 System files in the root directory
Step 3: Remove your Wi-Fi SD and insert it to your card reader again
Step 4: Please wait for 5 minutes to complete the whole firmware upgrade process
and do not power off your card reader or remove your Wi-Fi SD during the process.
Step 5: After the upagrade is completed, please insert your Wi-Fi SD to your camera
and check the firmware version has been updated.
Note: It’s important to have a stable power for firmware upgrade. In case of sudden
power outage, the firmware may be damaged.