SP / Silicon Power Sky Share S10 - Manual (Page 25)

25
Fig. 20 Setup page of Android App
Change SSID (Network Name):
The default SSID is Sky Share S10. If you want to change SSID (Network Name), you
can tap the SSID column and key-in your favorite SSID (Network Name). After
tapping “OK”, please follow the pop-up message to restart your camera (Power off
and then on your camera) in order to make the new setting take effect.
Wireless Password enable/disable:
The default setting is enabled. You may select “OFF” to turn off the password if
necessary.
Change password:
The default password is 88888888.
Follow the steps below to change the password:
Step 1: Tap password column and key-in your favorite password
Step 2: After tapping “OK”, please follow the pop-up message to restart your camera
(Power off and then on your camera) in order to make the new password take effect.
About Sky Share S10:
It will show the card capacity, current free capacity, MAC address, App version, and
firmware version information here.