Restore – SP / Silicon Power Sky Share S10 User Manual

Page 26

10. Restore

If you encounter a problem with Sky Share S10 or forget your password, you can

restore Sky Share S10 to the default setting to resolve the issues.

Please follow the steps below:

Step 1: Power on your camera.

Note: If your batter power is low, please charge your battery first before operation.

Step 2: Find a default “Restore” photo in pre-view mode of your camera.

Fig. 21 Default Restore Photo

Step 3: Delete this default restore photo by your camera, wait for 5 second, and then

restart your camera (power off and then on) to execute the restore command. The

system will take a while to reset Wi-Fi SD to the factory default setting. Please wait

for a while and then reconnect to your Wi-Fi SD.

Note: The system will automatically generate this default restore picture again

during next power on.