6 configure notification – LevelOne WHG-1000 User Manual
Page 99
![background image](/manuals/351564/99/background.png)
WHG-1000 300Mbps Wireless PoE Hotspot Gateway
User's Manual
99
4.5.6 Configure Notification
WHG-1000 can automatically send the notification of Traffic Log, On-Demand Log, Session Log and Billing
Report to 3 particular E-mail addresses. A trial email is provided by the system for validation. Please click on
Service Domain
→ Notification, the page of Notification E-mail Setup will appear
SMTP Server Setup :
Enabled : Click Enabled to activated SMTP Server
Sender From : The E-mail address of the administrator in charge of monitoring. This will show up as the
sender's E-mail.
SMTP Server : The IP address / Domain of the sender's SMTP server.
Port : The port of the sender's SMTP server. (Default is 25)
Sometimes SMTP server use Port 587 for TLS encryption and Port 465 for SSL encryption
Encryption : Some SMTP server need encryption linking for sending E-mail. The system provides
encryption for sender's SMTP server
SMTP Auth : Some SMTP server need authentication username and password for sending E-mail. The
system provides authentication for sender's SMTP server
Username : The sender's authentication username for STMP server
Password: The sender's authentication password for STMP server