LevelOne WHG-1000 - Manual (Page 35)

WHG-1000 300Mbps Wireless PoE Hotspot Gateway
User's Manual
35
4.2 Create Your Wireless Network
The system manager can configure related wireless settings, General Settings, Advanced Settings, Virtual AP
Setting, Security Settings and Access Control Settings.
4.2.1 Configure Wireless General Setup
The administrator can change the data transmission, channel and output power settings for the system. Please click
on Wireless
→ General Setup and follow the below setting.
 MAC address : The MAC address of the Wireless interface is displayed here.
 Band Mode : Select an appropriate wireless band; bands available are 801.11b, 802.11b/g, 802.11b/g/n and
802.11n.
 Transmit Rate Control : Select the desired rate from the drop-down list; the options are auto or ranging from
1Mbps to 54Mbps for 802.11b/g modes, or 1Mbps to 11Mbps for 802.11b mode.
 Country : Select the desired country code from the drop-down list; the options are US, ETSI and Japan.
 Channel : The channel range will be changed by selecting different country code. The channel range from 1 to
11 for US country code, or 1 to 13 for ETSI country code, or 1 to 14 for Japan(Channel 14 only for 802.11b
Rate).
 Auto Scan : Click this button, the channel will be changed to suitable channel
 AP List : Click this button, the system will show current all AP list. Click Rescan button to rescan list, click
Close button to close window