LevelOne WHG-1000 User Manual
Page 18
WHG-1000 300Mbps Wireless PoE Hotspot Gateway
User's Manual
18
Before Hotspot service active, make sure the Local Time is correctly.
Step 3 : Select Connection Type for WAN1 Port and Set DNS Server
Click System
→ WAN, the WAN Setup page will appear.
Select the appropriate Connection Type for WAN1 port, there are four types of WAN1 connections to be
selected from: Static IP, Dynamic IP, PPPoE Client and PPTP Client.
Enter the IP Address of a DNS Server provided by your ISP(Internet Service Provider). Contact the ISP if the
DNS IP Address is unknown.
Click Save button.
Step 4 : Configure Wireless General Settings
Click Wireless
→ General Setup, the Wireless General Setup page will appear.
Select desired wireless Band, Channel.
Click Save button