LevelOne EAP-200 - Manual (Page 67)

67
VLAN ID (when EtherType is 802.1 Q): The VLAN ID is provided to associate with certain
VLAN-tagging traffics.
Priority (when EtherType is 802.1 Q): It denotes the priority level with associated VLAN traffics.
Encapsulated Type (when EtherType is 802.1 Q): It can be used to indicate the type of encapsulated
traffics.
Opcode (when EtherType is ARP/RARP): This list can be used to specify the ARP Opcode in ARP
header.
Source: MAC Address/Mask indicates the source MAC; IP Address/Mask indicates the source IP
address (when EtherType is IPv4); ARP IP/MAC & MASK indicate the ARP payload fields.
Destination: MAC Address/Mask indicates the destination MAC; IP Address/Mask indicates the
destination IP address (when EtherType is IPv4); ARP IP/MAC & MASK indicate the ARP payload
fields.
Action: The rule can be chosen to be Block or Pass.
Remark: The note of this rule can be specified here.
When the configuration for firewall rule is provided; please click SAVE and Reboot system to let the
firewall rule take effort.
>>To insert a specific rule,
In in Setting column of firewall list will lead to the following page for detail configuration with rule ID for the
current inserted rule.
From this page, the rule can be edited form scratch or from an existing rule for revision.
>>To move a specific rule,
Mv in Setting column of firewall list will lead to the following page for reordering confirmation. After SAVE
button is clicked and system reboot, the order of rules will be updated.