LevelOne EAP-200 - Manual (Page 3)

3
Article I. Before You Start
Section 1.01 1.1 Preface
This manual is intended for system integrators, field engineers, and network administrators to set up
LevelOne’s EAP-200 802.11n/b/g 2.4GHz MIMO Access Point in their network environments. It contains
step-by-step procedures and visual examples to guide MIS staff or individuals with basic network system
knowledge to complete the installation.
Section 1.02 1.2 Document Conventions
Represents essential steps, actions, or messages that should not be ignored.
Note: Contains related information that corresponds to a topic.
Indicates that clicking this button will save the changes you made, but you must reboot the
system upon the completion of all configuration settings for the changes to take effect.
Indicates that clicking this button will clear what you have set before the settings are
applied.