LevelOne NVR-0216 - Manual (Page 25)

[NVR MANAGEMENT SOFTWARE USER MANUAL] 25
Configuring PTZ Preset Sequence
You can configure the PTZ preset sequence after you create and define
PTZ preset points for the cameras. To configure PTZ sequence, open
the setup wizard and go to NVR setting >> PTZ Config >> PTZ
sequence
1. Select an NVR
2. Select a channel
3. Preset points in the camera displayed on the left
4. Move the preset points to the right for sequence viewing
5. Use the "up" and "down" buttons to adjust the sequence order
1 2
3 4 5