King Electric ECP2P Electronic Programmable - Manual (Page 4)

ECP2P ECP2P
PROGRAMMING INSTRUCTIONS
ENERGY STAR
Technical support: (800) 603-5464 ext 111 / [email protected]
SAVE THESE INSTRUCTIONS
Program Mo-Su Temp.
6:00am
8:00am
6:00pm
10:00pm
70°
62°
70°
62°
Default Energy Star Schedule
Return
Sleep
Leave
Wake
Return
Sleep
Leave
Wake
Program Temp.
Monday - Friday Saturday Sunday
Temp. Temp.
Return
Sleep
Leave
Wake
Time Time Time
°F
°F
°F
°F
°F
°F
°F
°F
°F
°F
°F
°F
:
:
:
:
:
:
:
:
:
:
:
:
This thermostat provides 2 manual temperature
overrides.
TEMPORARY temperature change.
Turn switch to “RUN”.
Use or to change temperature setting.
The thermostat will memorize and use the new
setting after 5 seconds or until the next time-
temperature begins.
To end the temporary override turn the switch
away from “RUN” then back.
PERMANENT on HOLD temperature setting
Turn switch to “HOLD”.
Use or to change temperature setting.
The thermostat will use the new setting after 5
seconds until the user manually ends it.
To end the permanent on hold override turn the
switch away from “HOLD” to “RUN” or “Key
Lock”.
Turn switch to “RUN” to operate.
Press and together for 8 seconds.
Use either or to set differential.
The thermostat will memorize and use the new
setting after 5 seconds.
Turn switch to “Mo-Fr” (Monday - Friday).
Press to set first program-period of weekday.
Use or to set time for .
Press to set temperature setpoint.
Use or to set temperature.
Pressing will alternate the display between
time and temperature settings for all 4 buttons.
Press to set second program-period of
weekday.
Follow steps 3 - 5 to complete programming.
Press to set third program-period of weekday.
Follow steps 3 - 5 to complete programming.
Press to set fourth program-period of
weekday.
Follow steps 3 - 5 to complete programming.
Turn switch to “SAT” (Saturday).
Follow steps 3 - 5 to complete Saturday
programming.
Turn switch to “SUN” (Sunday).
Follow steps 3 - 5 to complete Sunday
programming.
2
1
Turn switch to “DAY”.
Use or to set day of the week.
Turn switch to “TIME”.
Use or to set hour and minute.
Set Day and Time Set Day and Time 1
1
2
Set To Run Set To Run 2
Positive Off Positive Off 2
1
3 Adjusting the Differential Adjusting the Differential
3
4
“ERR” will show if no data is input
after 10 minutes. To continue,
turn switch to “RUN” then back to
previous position.
3
4
5
6
4 Override Function Override Function
5 Your Schedule Your Schedule
7
8
9
10
11
12
13
14
15
3
4
1
2
3
4
1
2
3
4
Wattage
100 to 1000W
1200 to 2000 W
2000 to 2750 W
3000 to 3840W
Suggested
Differential
1°
2°
3°
4°
6 Display Options / TAP Display Button Display Options / TAP Display Button
1
2
7 Batteries Batteries
1
Wake
Wake
OK
OK
Wake
Return
Sleep
Leave
Leave
Return
Sleep
2
2
Morning wake-up program
Daily (away from home) program
Evening home program
Nightly sleep program
Room Temperature / Day and Time /
Setpoint Temperature Alternating
Room Temperature Only / No Alternating.
LCD display and relay are battery powered, not
charged by line voltage. One year life is expected.
“BAT LO” showing on the LCD indicates time to
replace the batteries.
Depressing this button disconnects both power
leads from the heater. No matter how low the
temperature gets the heater will not energize
when this button is in the down position.
The backlight turns off when the “Off” button is
depressed.
Key Lock
This deactivates buttons on the
front panel. Temperature can not
be changed without switching back
to “RUN”.
ECP2P programming.ai : 6/10
Key Lock
Key Lock
Key Lock
Key Lock
Key Lock
Key Lock
Key Lock
Day
Day
Day
Day
Day
Day
Time
Mo-Fr Sat
Sun
Hold
Run Return
Sleep
OK
Leave
Wake Reset
Wake
Leave
OK
Sleep
Return Run
Hold
Sun
Sat Mo-Fr
Time
Day
Reset
Time
Mo-Fr Sat
Sun
Hold
Run Return
Sleep
OK
Leave
Wake Reset
Time
Mo-Fr Sat
Sun
Hold
Run Return
Sleep
OK
Leave
Wake Reset
Time
Mo-Fr Sat
Sun
Hold
Run Return
Sleep
OK
Leave
Wake Reset
Time
Mo-Fr Sat
Sun
Hold
Run
Return
Sleep
OK
Leave
Wake Reset
Time
Mo-Fr Sat
Sun
Hold
Run Return
Sleep
OK
Leave
Wake Reset
Disp
C US
LISTED
UL
®