KB Electronics KBWS-25D - Manual (Page 23)

Note: In some applications, especially those requiring the motor to
cycle on and off or from one speed to another or from stop to high
speed, the CL LED may blink, indicating a transient overload. This may
be a normal condition for the application.
4. Proper Plug-In Horsepower Resistor® is not installed. See Table 3, on page 12.
XI. OPTIONAL ACCESSORIES
Complete instructions and connection diagrams are supplied with all accessories to
facilitate installation.
A. DIN Rail Mounting Kit (P/N 9995) – Allows mounting of the control to a DIN rail.
B. Product Safety Module (PSM) (P/N 8611) – Protects the machine operator
from injury due to a runaway or uncontrolled acceleration condition.
C. AC Line / Armature Fuse Kit (P/N 9849)
23