Assembly procedure for s-tek backshell adaptors, Fig.3 – Harwin Datamate S-Tek User Manual
Page 4
ASSEMBLY PROCEDURE FOR S-TEK BACKSHELL ADAPTORS
Harwin North America
Harwin Europe
Harwin Asia
T: +1 603 893 5376 F: +1 603 893 5396
T: +44 (0) 23 9231 4545 F: +44 (0) 23 9231 4590
T: +65 6 779 4909 F: +65 6 779 386
E:
W:
www.harwin.com
E:
W:
www.harwin.com
E:
W:
www.harwin.com.sg
IS-32 Issue: 4 Date: 01.04.11 C/Note: 11172
Page 4 of 4
d. Apply ‘E’-clip to jackscrew as shown in Fig.3 and repeat step a. to c. for second ‘E’-clip
application. Assembly complete. Make sure that both ‘E’-clips are fully seated around the
jackscrews.
Please contact
for advice and assistance.
All instructions are available at
http://www.harwin.com/downloads/instructions/
For full tooling instructions on the Band-It Tie Dex go to
http://www.band-it.co.uk/tooling.htm
and
select tool A590 for full details.
Fig.3