Atlantis Land A02-RI_M02 - Manual (Page 9)

6
Chapter 3
Configuration
3.1 Before Configuration
This section describes the configuration required by LAN-attached PCs that communicate with
Mistral Lan Router ISDN, either to configure the Mistral Lan Router ISDN , or for network access.
These PCs must have an Ethernet interface installed properly, be connected to the Mistral Lan Router
ISDN either directly or through an external repeater hub, and have TCP/IP installed and configured to
obtain an IP address through a DHCP server.
Directly connect a Windows OS to the Mistral Lan Router ISDN. If TCP/IP is not already
installed, follow the steps below for its installation.
Any TCP/IP capable workstation can be used to communicate with or through
Mistral Lan Router ISDN. To configure other types of workstations, please
consult the manufacturer’s documentation
Configuring PC in Windows 95/98/ME
Go to Start/Settings/Control
Panel. In the Control Panel
double-click on Network and
choose the Configuration tab.
Select TCP/IP -> NE2000
Compatible, or any Network
Interface Card (NIC) in your PC.