Atlantis Land A02-RI_M02 - Manual (Page 29)

27
Step 5: Enter the following information:
Profile Name: a name associated with this profile.
Call Direction: if the remote site will be dialing in, select Incoming. If the MISTRAL LAN
ROUTER ISDN will dial out to the remote site, select Outgoing. Select Both if either side can
initiate the connection. The default setting is Both.
Call Back: if Call Back is enabled (Yes is selected), it checks the Remote System Name and
Remote Password. If a call is received and authentication succeeds, it disconnects the incoming
call, and calls the number in the Call Back field. If Call Back is not enabled (No), the Call Back
Number field will not display. If the Call Direction is Outgoing only, Call Back options will not
display.
Remote Phone Number:
My Account Name:
My Account Password:
Remote Account Name:
Remote Account Password:
Step 6: If you selected Outgoing or Both as your Call Direction, click APPLY and TEST, or
select ADVANCED for more options. You must still click Apply and Test even if the other end
of the connection has not been configured. In this case the test will fail, but that can be considered
normal
.
Make sure the remote site is configured with the same values you specify in
My Account Name and My Account Password.