Atlantis Land A02-RI_M02 User Manual

Page 30

4.2 Advanced Options for Remote Office Access Profiles

If you press the Advanced button from the above Connection Profile Configuration, the

following screen appears.

Step 1: Set any of the following parameters:

Data Service: choose 64K, 56K, or Auto. Select Auto unless you know the speed required by
the other end of the connection requiring either 64K or 56K.

Remote Sub-Address:

Caller ID Authentication: select Yes if you want to check the caller ID before accepting the call.
This service may require a special agreement with your ISDN service provider.

Caller ID Number:

STAC Compression: allows outgoing data to be compressed to achieve higher throughput, and
compressed incoming data to be recognized. The ability to use compression depends on the
capabilities of the ISP.

Idle Timeout: the number of seconds of inactivity over the connection. When this value is
reached, it will disconnect the call. You can set the idle timeout from 0 to 3600 seconds. The
default setting is 120 seconds. If you select 0, the connection never times out.

Enable IP:

IP RIP:

Remote IP Address:

Remote IP Netmask:

Enable Bridging:

Step 2: If advanced configuration is required for the operation on the ISDN, and its load sharing