Atlantis Land A02-RI_M02 - Manual (Page 7)

5
2.3 The rear ports
Power (jack)
Connect the supplied power adapter to this jack
Console (port)
Connect the supplied RS-232 cable to this port when connecting to a
PC’s RS-232 port (9-pin serial port).
ISDN So
(RJ-45 connector)
Connect an RJ-45 cable to this port when connecting to the ISDN.
LAN 1-4
(RJ-45 connector)
Connect an UTP Ethernet cable to this port when connecting to a
LAN such as an office or home network.
WAN
(RJ-45 connector)
Connect an UTP Ethernet cable to this port when connecting to the
Internet or making other WAN connections
2.4 Cabling
Now you should be ready to connect your MISTRAL LAN ROUTER ISDN on your LAN and
WAN or ISDN jacks. Follow these steps to install:
• Connect the router from EWAN port to an ADSL/cable modem, or attach the ISDN line to the
ISDN connector (S/T interface).
• Connect the PC to the RJ-45 LAN connector. Two or more PCs can connect to a multi-port
Hub first and then uplink (cascade) port on the hub must be connected to LAN port.
• Plug the power adapter into a wall outlet and into the AC connector on the back of Mistral
Lan Router ISDN.