SKC 228-9530 QuickTake 30 - Manual (Page 22)

21
Resetting Pump to Manufacturer Default
Settings
1. Press the security code

and then press the CAL
butt on. The pump soft ware version number will display
briefl y.
2. Press

repeatedly to scroll through until the LED
displays dEFt.
3. Press [

]. The word no will appear on the display.
To reset to factory default sett ings: Press

. YES
will appear on the display. Press [

].
To retain existing sett ings: Press

to scroll to
no and press [

].
The number 30 will appear briefl y, then the display will return
to run time presets.
Digital display:
Yes, reset to pump default
Digital display:
Pump default
Digital display:
No, do not reset to pump
default
Enabling/Disabling Alarm and Fault Features
1. Press the security code

to enter setup mode.
2. Press CAL. The pump soft ware version number will display briefl y.
3. Press  or  to turn feature on or off (see below). Press

to advance to next
feature.
4. Press [

] to exit feature setup. Press [

] again to return to run time
presets.
Feature ON OFF
Button Beeper: On/Off
Alarm Beeper: On/Off
Flow Fault: On/Off
Flow Fault Restart: On/Off
Digital display:
Button beep on
Digital display:
Button beep off
Digital display:
Alarm beep on
Digital display:
Alarm beep off
Digital display:
Flow fault on
Digital display:
Flow fault off
Digital display:
Flow restart on
Digital display:
Flow restart off