SKC 110-100 AirLite User Manual
Page 11
9
Turn off the pump. Disconnect the calibrator and replace the
representative tubes with new unexposed media for sampling.
Caution: Do not operate AirLite in hazardous or explosive
locations. AirLite is designed for applications that do not require
intrinsic safety.
Caution: Failure to follow warnings or cautions voids any
warranty.
Note: The CPC has two small inlet ports on the bottom of the unit.
These ports should be periodically inspected for blockage, which
can occur when sampling in dusty environments. Blocked ports may
cause back pressure to increase. Clean ports with a small pick and
use air to blow away particles.
2
cont’d