SecurityMan Panbase - Manual (Page 12)

Install or replace the remote control’s battery
1) Open the cover from the back of the remote control.
2) Place one 12V 23A battery to the slot and close the
cover.
Note: Battery life is 1-4 month is depending on the usage. If
the battery level is low, the remote controller will not be so
effective. The battery can be purchased through any local
electronic stores.
Using the Remote Control Pan Base
1) Plug the 15V AC power adapter to the 15V AC input
cable, press the left button (ON/OFF button) on the remote
control and the Pan Base will start to rotate clockwise and
counterclockwise. The remote control will display a red LED
light when the remote button is pressed.
ON/OFF Button
LED Indicator
Rotation Button
Clockwise/
Counter-clockwise
12