SecurityMan iCamDVR1W User Manual

Page 4

Camera(SM-302TX) and Receiver(SM-302RX) Setup

4601 E. Airport Dr. Ontario,

CA 91761, U.S.A.

Tel: 888-977-3777

Fax: 909-230-6889

All trademarks or registered trademarks are properties of

www.securitymaninc.com

3. Press the Power ON/OFF button located on the front

panel of the receiver and the CH1 indicator lights up

green.

Note: CH2 indicator light, CH button, #1/#2 dip switch, and

ML dip switch is not in use and are not designed for this

model of receiver.

4. Connect the AV cable to the iCamDVR video and

audio input, match yellow to yellow and red to white.

1. Find a suitable location about 10~15ft away from the

receiver and plug in the power adapter for a quick test

prior to mounting the camera. Connect the adapter

plug (DC 8V 300mA) to the camera, the other end to AC

electricity outlet, as shown above.

2. Connect one end of AV (red, yellow) cable to receiver,

other end into the video/audio inputs of the iCamDVR,

as shown in step 4 below. Then connect adapter plug

(DC8V 300mA) to receiver’s power jack, as illustrated

above.

iCamDVR1W

1 wireless camera system for video recording and

remote monitoring from PC