SecurityMan DigiminiAir User Manual
Page 18
17
Troubleshooting
Q: There is no picture from a camera?
Check all connections to the camera and the receiver. Make sure that the
camera and receiver are both ON and that the camera(s) is in range of the
Receiver.
Q: The image from the camera(s) is choppy and/or keeps cutting out?
The wireless receiver may be out of range of the camera(s). Use the signal
bars on the on-screen display to observe signal strength. 0~1 bars = no/
weak reception; 4 bars = strong reception.
Q: I can’t hear any sound on my TV?
Check the connections between the receiver and the TV, specifically the
red and/or white connector(s) are plugged in correctly. Check the volume
settings on the TV. Also, remember that the range of the microphone is
not the same as the range of the camera – the camera will detect anything
in front of it that it sufficiently lit, however a microphone will only pick-up
sound within a few feet (unless the sound is very loud).