SecurityMan DigiminiAir - Manual (Page 12)

11
Quick Start
Please follow steps 2~5 below and test both the camera and the receiver
first prior to installing the camera in the desired location. Do a simple test
to make sure the camera and the receiver are both working and that the
receiver are able to pick up the camera image.
Camera Installation (SM-209DT)
1. Mounting the camera:
a) Detach the cameras mounting bracket by removing the two
screws located on the left and right side of the camera using
a Philip screw driver.
b) Secure the camera’s mounting bracket in the desired location
using the wall mount bracket and screws provide as shown below.