Schlage BE469NX User's Guide - Manual (Page 6)

6
ENGLISH
Tips for Successful Programming
L Want to see a video of programming
before you begin?
Browse to answers.schlage.com.
L The lock comes preset with a unique
default Programming Code and two
unique Default User Codes. You can
either use these codes to operate
your lock or change them using the
instructions in this guide.
L Default Codes are located on the back of
the Alarm Assembly, and on the back of
this guide.
L User Codes can also be programmed
using the Nexia Home Intelligence
System. Browse to
www.nexiahome.com for more
information.
Programming Descriptions
Add User Code Adds one User Code. User Codes are used for unlocking the lock.
Codes can be 4 - 8 digits long. All codes must be the same length.
See Change User Code Length on page 7.
Delete User Code Removes one User Code at a time.
Change
Programming Code The Programming Code is used to put the lock into Programming
Mode. It is 6 digits long.
Enable
Vacation Mode When Vacation Mode is enabled, no User Codes can be entered into
the Touchscreen. This provides extra security while you are away
from your home for an extended period of time.
Disable
Vacation Mode Returns lock to normal operation.
Enable/Disable
Beeper The beeper can be turned off if desired. Beeps will still sound
during programming.
Delete ALL
User Codes Removes ALL User Codes from the lock.
Enable/Disable
Lock & Leave When Lock & Leave Mode is enabled, the lock can be locked from
the outside by simply pressing the Outside Schlage Button. When
disabled, a User Code must be entered to lock from the outside.
This feature is enabled by default.
Change
User Code Length You can change the length of the User Codes in your lock. User
Codes can be 4 - 8 digits in length. Default is 4 digits. Changing
the User Code length will delete all existing User Codes!
Enable/Disable
Auto-Lock When Auto-Lock is enabled, the lock will automatically relock itself
30 seconds after being unlocked. This feature is disabled by default.
Temporarily
Disable
Auto-Lock Auto-Lock must already be enabled. While the deadbolt is locked,
press the Outside Schlage Button and then enter a 4-8 digit User
Code to unlock the deadbolt. Within 5 seconds, manually lock and
unlock the deadbolt using the thumbturn.
Restore
Auto-Lock To restore Auto-Lock, simply lock the deadbolt using the
thumbturn.
PROGRAMMING THE TOUCHSCREEN
Red X
• If there is a problem during
programming, you will see the red
error X.
Touchscreen
• Use the numbers on the Touchscreen to
enter codes and for programming.
Programming Indicator
• Blinks when Programming Mode is
entered
• Solid while a programming function is
being performed.
Outside Schlage Button
• The first button you will
press in the programming
process.
• Can also be pressed to exit
programming immediately.
Green Check Mark
• Blinks when a number
key is pressed and when a
function is complete.