Maintenance instructions, Replacing the filter-drier – Robinair 348012K Recovery, Recycling, Recharging Unit User Manual
Page 22
© 2000 Robinair, SPX Corporation
2 0
Filter-Drier
INST0477
Location of the Filter-Drier
REPLACING THE FILTER-DRIER
Order part #34724 for a replacement filter-drier. The filter-
drier on this unit is designed to trap acid and particulates and
is formulated to remove water from the refrigerant. You must
change the filter-drier to assure adequate moisture and
contaminant removal.
Typically, you can recycle up to 300 pounds (136 kilograms)
of refrigerant between filter changes.
CAUTION!
For best results, use Robinair filter-driers
(part no. 34724). All performance tests and claims are
based on using this specially-blended filter-drier. Use of
another may affect performance results.
1. Press
MENU
.
2. Scroll through the menu to CHANGE FILTER and
press
ENTER
. Display reads:
RXX Filter Weight X.XX lbs.
3. Press
START
to begin.
4. Wait for the unit to self clear.
5. When clearing is complete, the display reads
DISCONNECT POWER. Replace RXX filter.
6. Turn off the main power and unplug the machine.
7. Open the unit door and replace the old filter with the
new filter.
8. Close the unit door, plug in the machine, and turn on the
Main Power.
9. Close the door to the unit.
10. The filter change is now complete.
Maintenance Instructions
INST 0716
Filter
Filter