Ransburg 9040 Classic HV Power Supply 77070-33 - Manual (Page 15)

CP-08-01
9040 Classic HV Power Supply - Installation
1 2 1 2 1 2 1 2 1 2
3. Remove the factory installed jumper from 1TB-
5 to 1TB-6 and replace with contact wires of the
external reset device. The external reset device
The external reset device The external reset device The external reset device The external reset device
contacts must be rated for at least 100 contacts must be rated for at least 100 contacts must be rated for at least 100 contacts must be rated for at least 100 contacts must be rated for at least 100
milliamps at 15 volts DC. The contacts of
milliamps at 15 volts DC. The contacts of milliamps at 15 volts DC. The contacts of milliamps at 15 volts DC. The contacts of milliamps at 15 volts DC. The contacts of
the external reset device must be normally
the external reset device must be normally the external reset device must be normally the external reset device must be normally the external reset device must be normally
closed.
closed. closed. closed. closed.
4. Secure the cabinet door, replace the fuse, and
plug in the power supply.
N O T E S N O T E S N O T E S N O T E S N O T E S
ARCHIVE