Gentec-EO QE and XLE4 - Manual (Page 17)

QE Series Joulemeter Instruction Manual Version 3.0 April 2014 17
Footnotes
Model OEM
QE25SP-S-MT
QE25SP-H-MT
Optical Absorber MT
Spectral Range 1, 7, 14 0.19 – 20 µm
Calibrated Spectral Range
(QE-QED Series)
1, 7
0.248 – 2.5 µm
0.3 – 2.1 µm
Typical Sensitivity 2, 13 20 V/J
Calibration Uncertainty
2, 7, 8, 10,
13
± 3%
Repeatability < 0.5 %
Max. Pulse Energy 1.064 µm
0.266 µm
With QED @ 1.064 µm
QED @ 0.266 µm
3, 11
3.0 J
0.44 J
10 J
1.45 J
Noise Equivalent Energy (NEE)
(Typ)
2, 10 2 µJ
Max. Repetition
Rate
2, 4, 10
MAESTRO,S-LINK, M-LINK: 6000 Hz
INTEGRA: 5200Hz
Typical Rise Time
(0-100%)
2, 10 20 µsec
Max. Pulse Width (Typ) 2, 5, 9, 10 10 µsec
Max. Energy Density
11
500 mJ/cm
2
@ 1.064µm, 7ns, 10 Hz
70 mJ/cm
2
@ 532nm, 7ns, 10 Hz
70 mJ/cm
2
@ 266nm, 7ns, 10 Hz
Max. Energy Density with QED
4 J/cm
2
@1064nm, 7nsec, Single shot
2 J/cm
2
@1064nm, 7nsec, 10Hz
0.35 J/cm
2
@532nm, 7nsec, 10Hz
0.3 J/cm
2
@266nm, 7nsec, 10Hz
Max. Average Power
Detector Alone (QE25SP-S-MT):
With optional Heatsink (QE25SP-H-MT):
11, 14 5 W (15 W with QED)
10 W (30 W with QED)
Max. Power Density
Detector Alone (QE25SP-S-MT):
With optional Heatsink (QE25SP-H-MT):
With QED :
10 W/cm² @ 5 W
10 W/cm² @ 10 W
600 W/cm²
Dimensions (H x W x D)
Detector Alone (QE25SP-S-MT):
With optional Heatsink (QE25SP-H-MT):
50 x 50 x 14 mm
50 x 50 x 52.5 mm
Weight
Detector Alone (QE25SP-S-MT):
With Optional Heatsink (QE25SP-H-MT):
120 g
187 g
Aperture Size
QE 25:
QED 25:
25 x 25 mm
22 x 22 mm
Aperture Area Size
QE 25:
QED 25:
6.25 cm
2
4.84 cm
2