Gentec-EO QE and XLE4 - Manual (Page 10)

QE Series Joulemeter Instruction Manual Version 3.0 April 2014 10
Footnotes
Model
QE25SP-S-MB
QE25SP-H-MB QE25LP-S-MB
QE25LP-H-MB
Optical Absorber MB
Spectral Range 1, 8 0.19 – 20 µm
Calibrated Spectral Range
(Optional)
(QE-QED Series)
1, 8
0.248 – 2.5 µm
10.6 µm
0.3 – 2.1 µm
Typical Sensitivity 2, 7 10 V/J
Calibration Uncertainty 7, 2, 8, 9, 11 ± 3%
Repeatability < 0.5 %
Max. Pulse Energy 1.064 µm
0.266 µm
With QED @ 1.064 µm
QED @ 0.266 µm
3, 12
3.75 J
3.1 J
23 J
4.8 J
Noise Equivalent Energy (NEE)
(Typ)
2, 11 4 µJ
Max. Repetition
Rate
2, 5, 11 800 Hz 300 Hz
Typical Rise Time
(0-100%)
2, 11 200 µsec 550 µsec
Max. Pulse Width (Typ) 2, 6, 10, 11 150 µsec 400 µsec
Max. Energy Density
12
600 mJ/cm
2
@ 1.064µm, 7ns, 10 Hz
500 mJ/cm
2
@ 266nm, 7ns, 10 Hz
Max. Energy Density with QED
16 J/cm
2
@1064nm, 7nsec, Single shot
8 J/cm 2 @1064nm, 7nsec, 10Hz
6 J/cm
2
@532nm, 7nsec, 10Hz
1 J/cm
2
@266nm, 7nsec, 10Hz
Max. Average Power
Detector Alone (QE25xP-S-MB):
With optional Heatsink (QE25xP-H-MB):
12, 13 5 W (15 W with QED)
10 W (30 W with QED)
Max. Power Density
Detector Alone (QE25xP-S-MB):
With optional Heatsink (QE25xP-H-MB):
With QED :
10 W/cm² @ 5 W
10 W/cm² @ 10 W
600 W/cm²
Dimensions (H x W x D)
Detector Alone (QE25xP-S-MB):
With optional Heatsink (QE25xP-H-MB):
50 x 50 x 14 mm
50 x 50 x 52.5 mm
Weight
Detector Alone (QE25xP-S-MB):
With Optional Heatsink (QE25xP-H-MB):
120 g
187 g
Aperture Size
QE 25:
QED 25:
25 x 25 mm
22 x 22 mm
Aperture Area Size
QE 25:
QED 25:
6.25 cm
2
4.84 cm
2