Replacing the batteries, 4 flash series specifications – Gentec-EO FLASH User Manual
Page 8
Revision 1.5
4
FLASH Series Instruction Manual
Gentec Electro-Optics Inc. All rights reserved
1.4 Replacing the batteries
When the low battery indicator (
) appears on the LCD you can still take around 300 measurements
with the Flash power meter.
To replace the 2 x AA batteries that power the Flash unscrew the 4 Phillips screws on the back of the
monitor and open up the casing.
Figure 1 : Batteries compartment
1.4 Flash series specifications