General Tools and Instruments VC9200 - Manual (Page 6)

Before beginning an unattended data logging session, remember to disable
the VC9200’s Auto Power Off (APO) function by switching to operation in REC
(Min/Max) mode. Once the APO function has been disabled, the meter will
remain on and able to log data until its battery is drained of charge. A fresh
“9V” battery should provide dozens of hours of operating time under normal
circumstances.
SPECIFICATIONS
Measurement Ranges/Resolutions: 0 to 1125 torr/1 torr
0 to 1500 mbar/1 mbar
0 to 1125 mmHg/1mm Hg
0 to 1,125,000 µmHg/1000 µmHg
0 to 150,000 Pa/100 Pa
0 to 150 kPa/0.1 kPa
0 to 21.75 psi/0.01 psi
0 to 44.3 in.Hg/0.02 in.Hg
Measurement Accuracy: ±1% of full-scale value at room temperature
Sampling Time: 0.8 seconds
Auto Power Off Trigger: 10 minutes of front-panel inactivity
Current Consumption: 7.1 mADC (typical)
LCD Size: 2.4 x 1.3 in. (61 x 34mm),
with 0.6 in. (15mm) high digits
Operating Temperature: 32° to 122°F (0° to 50°C)@<80%RH
Dimensions of Meter: 7.1 x 3.1 x 1.4 in. (180 x 78 x 34mm)
Weight of Meter: 7.76 oz. (220g)
Dimensions of Vacuum Sensor: 4.8(L) x 1.2(D) in. (74 x 30mm)
Weight of Sensor: 6.4 oz. (183g)
Power Source: (1) “9V” battery (not included)
6