General Tools and Instruments DMM333 - Manual (Page 20)

20
• Resistance
Measurement (Ω)
To avoid electrical shock or
damage to the meter when
measuring resistance or continuity
in a circuit, make sure the power
to the circuit is turned off and all
capacitors are discharged.
1.Turn the rotary switch to the
appropriate resistance (ohms)
range. Make sure power is
disconnected from the circuit
to be measured.
2.Measure the resistance by
touching the probes to the
desired test points of the circuit.
3.Read the measured resistance
on the display. When the
resistance value is over range,