General Tools and Instruments CT6235B - Manual (Page 13)

SPECIFICATIONS
Measurement ranges Rotational speeds from 0 to 20,000
rpm; linear speeds from 5cm/min
(2 in./min) to 2km/min (6,562
ft/min); lengths from 5cm to 10km
(2 in. to 6.2 miles)
Measurement accuracy ±0.05% of reading plus one digit
Resolutions 0.1 rpm for rpm measurements to
999 rpm, 1 rpm at higher speeds;
0.01m/min for linear speeds up to
99.99 m/min, 0.1m/min at higher
speeds; 0.02m over full length
measurement range
Sampling time 0.8 seconds at speeds over 60 rpm
Storage capacity 96 measurements
Recallable measurements Maximum, minimum, last
Microcontroller Single custom chip
Time base Quartz crystal
Display type 5-digit yellow-green backlit liquid
crystal
Display dimensions 1.0625 in. high x 1.8725 in. wide
(27 x 47.6mm)
Instrument dimensions 8.27 x 2.91 x 1.46 in.
(210Ч74Ч37mm)
Instrument weight 0.62 lb. (280g), including batteries
13