General Pump VK Repair Manual - Manual (Page 18)

GENERAL PUMP
A member of the Interpump Group
VK SERIES
Page 18
C) Remove the Seeger ring and the seal ring as indicated in fig. 50 and, with a special plastic pin, remove
the LP (low pressure) ring seal (1) as indicated in fig. 51.
The O-rings and the low pressure seals must be replaced at each disassembly.
C) With the liner separate from the seal support and with the special plastic pin (3) as indicated in fig. 52,
have the HP (high pressure) packing come out (4) operating as in fig. 53.
The HP packing (4) in fig. 53 will have to be replaced at each disassembly.