General Pump MKS Repair Manual - Manual (Page 26)

GENERAL PUMP
A member of the Interpump Group
MKS SERIES
Page 26
Disassemble the suction and delivery valve units by screwing on an M10 screw long enough to act on the
valve and extract the valve guide from the valve seat (1, fig. 87).
If the extraction of the of the suction valve unit is particularly difficult (for ex. due to
incrustations caused by prolonged pump inactivity) use the extraction tool
p/n F27516200 (for MKS40A, MKS45A, MKS50A) or p/n F27516300 (for MKS55A, MKS60A
and MKS65A) (1, fig. 85) and act as indicated.
Unscrew the valve opening device using a 30 mm wrench (1, fig. 86).
Ref 300699 Rev B
05-13