Fairbanks 9120 Series Omnicell - Manual (Page 7)

Sect ion 1: General Information
11/12 7 51267 Rev. 2
The 9120 Series can be installed using mechanical fasteners (nuts and bolts). This
installation method eliminates the need for onsite welding.
It can also be a combination of welding and mechanical fasteners. For example, the
top plate can use mechanical fasteners and the base assembly can be welded.
Omnicell systems principle causes of problems are because of mechanical restrictions
to, and interaction with, the weigh vessel. The cause is invariable excessive vessel or
support deflection that needs be identified, if possible, during the design phase.
Close attention should be made to ladders, catwalks, piping, and any items that
restrict deflection of the vessel.
The 9120 Series Omnicells are commercially approved for applications in the U.S.,
however Fairbanks Scales recommends contacting your local Weight and Measures
Office prior to beginning any Omnicell installation that requires commercial approval.
CERTIFICATIONS
NTEP CC: 97-078