Fairbanks 9120 Series Omnicell - Manual (Page 6)

11/12 6 51267 Rev. 2
Section 1: General Information
INTRODUCTION
This manual provides general installation and maintenance instructions for the
Fairbanks Scales’ 9120 Series Omnicell. Almost every installation is different, so
please adjust the following information, as needed, for your application.
Specifications, parameters and application notes are included.
This manual is meant to give general instructions for applying the Omnicell
considering its inherent capabilities and limitations; it is not meant to be a scale
design manual. Questions concerning specific applications should be directed to the
appropriate Product manager.
For complete 9120 Series installation you will also need to reference the necessary
instrumentation manual.
DESCRIPTION
Fairbanks Scales Omnicells are a combination of two main components:
•
Mounting assembly (captivates the load cell and provides means to fasten to
the vessel and flooring).
•
Load cell (the actual weight detecting device).
The 9120 Series Omnicells will arrive preassembled, excluding the load cells. This
mounting assembly is specifically designed to be installed without the load cell for
easy installation. Load cell installation is done quickly, just prior to calibration.
The 9120 Series Omnicells are available in standard capacities ranging from 7.5 t to
100 t. (t = metric tonne.) Higher capacities are available, contact the appropriate
Product Manager.
The load cells are constructed from stainless steel and are a rocker-column design.
The mounting assembly is available in either a zinc-plated or cast mild steel or
stainless steel construction.
These Omnicells can be welded to the load carrier and the foundation. Welding
eliminates problems of getting holes on the top and bottom line up. These
assemblies are designed for a welded installation, so welding will not cause any
service issues (load cell replacement).