Testing the ip network output – Fairbanks FB3000 Kernel Program Operators Manual User Manual

Page 37

Section 4: Input/ Output (I/O)

04/12

51147 Rev. 3

4.4.3. Testing the IP Network Output

Test Instructions to activate the

IP Network

Output

function from the FB3000

Kernel Weight Server program.

1. Setup the

IP Network Output

as described in Section 7.6.2. of this manual.

2. Return the Kernel back to the Weight Processing Screen.

3. At a different computer on the same network, use Hyper-Terminal to receive the

data.

4. Start Hyper-Terminal, enter a New Connection name. Example: Test. Click OK.

5. Set the Connect Using drop down box to

TCP/IP (Winsock).

7. Set the

Host Address

to the IP address of the computer or FB3000 that the

Kernel.exe is running on.

7. Set the

Port Number

to the same value as the Local port is set.

8. Click OK. If a connect attempt is made, it will fail at this point, ignore and clear

the error message.

9. Select the Call menu item and select

Wait for Call

from the drop down menu.

10. If all is working, the instrument should make connection and weight data should

be displayed in the Hyper-Terminal window in the format set previously in the
setup instructions